Yamaha CHR15 Passiv højttaler

Yamaha CHR15 Passive Speaker — FOH Performance Built on Pro Plywood

The CHR15 is a 2-way passive loudspeaker engineered for front-of-house sound reinforcement, pairing a 15-inch ferrite-magnet woofer with a 1.4-inch compression driver in a bass-reflex enclosure. Reaching 49 Hz to 20 kHz at 125 dB SPL peak, the Yamaha CHR15 delivers clean full-range audio in venues from clubs to houses of worship. This passive speaker fits live-sound operators needing touring-grade output from a single cabinet.

What Sets the CHR15 Apart in the Yamaha Passive Lineup

Unlike entry-level plastic cabinets, the CHR15 uses the same plywood construction found on Yamaha's flagship CZR Series, finished in a tough polyurea coating that resists scuffs during load-in. Custom-designed transducers feed a 2.0 kHz crossover, and dual-angle 35 mm pole sockets let engineers aim the box at 0° or tilt it down 7° without extra hardware.

Transducers and SPL — Headroom for Live Mixes

Driver selection defines how a passive cabinet behaves at the limit, and this model is built around a beefy low-frequency motor structure that keeps bass articulate near peak SPL.

• 15" cone with 2.5" voice coil and ferrite magnet moves serious air for kick drums and bass guitar.
• HF Driver: 1.4" diaphragm, 1" throat compression driver, ferrite magnet — handles vocals with controlled dispersion
• Peak SPL: 125 dB — headroom for medium-sized rooms without external processing

Coverage Pattern and Power Handling — Predictable Throw

A passive box only performs as well as its amplifier, so Yamaha rates the CHR15 across a three-tier power spec that maps cleanly to PX Series amp outputs.

• Coverage: 90° H × 60° V — wide enough for short-throw FOH, tight enough to control stage wash
• Power Rating: 250 W noise / 500 W program / 1000 W peak — matches Yamaha PX Series amplifier headroom
• Nominal Impedance: 8 Ω — pairs cleanly with most pro amplifiers

Cabinet, Rigging, and Connectivity — Road-Ready Hardware

The enclosure gets touched, dropped, and stacked, so Yamaha built the CHR15 around plywood rather than molded plastic.

• Cabinet Material: Plywood with polyurea finish — resists vibration and road rash better than ABS
• Inputs: SpeakON NL4MP × 2 (parallel) — loop-through to a second cabinet on the same amp channel
• Rigging Points: Top × 2, Rear × 1 (M10 eyebolts) — supports flown installation
• Net Weight: 22 kg — manageable for one tech on a tripod stand

Who Should Buy the Yamaha CHR15

It remains the right choice for small-to-medium venue operators, mobile DJs, and houses of worship needing a reliable FOH cabinet without buying a powered model. Touring bands benefit from the plywood construction and 125 dB peak SPL, while installed-sound contractors appreciate the M10 rigging points and dual-angle pole mount. Pair it with a Yamaha PX Series amplifier and dedicated processor tuning unlocks crossovers, EQ, and limiting tailored to the box.

Yamaha Pro Audio — A Tiered Passive Loudspeaker Family

Yamaha's CHR Series sits between the entry-level CBR line and the flagship CZR Series, sharing the same plywood cabinet DNA as the higher-end CZR models. The CHR15 targets FOH applications, while CHR12M and CHR15M variants serve as floor monitors with coaxial drivers.