Light4Me Venom Strobe Bar V2 LED-lysbjælke

Light4Me Venom Strobe Bar V2 — Multi-System LED Strobe Bar

Three independent LED systems share one 100 cm housing in the Light4Me Venom Strobe Bar V2, giving lighting designers strobe, blinder, and chase functions from a single fixture. Fourteen individually controllable sections run pixel-style sequences across warm white, cool white, and RGB color layers. The 2.9 kg aluminum chassis, powercon in/out chain, and included mounting bracket make the bar practical for clubs, bands, community halls, and touring DJs.

Three LED Engines in One Compact Bar

What separates this model from a conventional strobe is the integration of warm white, cool white, and RGB LED arrays on the same PCB, split into 14 zones for pixel-style chases. The 5° beam angle and 32-bit linear dimmer with 0–30 Hz adjustable strobe frequency give precise pulse control.

LED Configuration and Beam Characteristics

• Warm White LEDs: 14x 3 W SMD3535 — primary strobe source for full-power flashes.
• Cool White + RGB LEDs: 180x 0.1 W CW SMD5730 + 168x 0.3 W RGB SMD5050 across 14 sections — adds crisp white pulse layers and full-color chases.
• Beam Angle: 5° — narrow, long-throw beam for mid-sized venues.

DMX, Sound, and Auto Operation

• DMX Channels: 5 / 14 / 71 — simple strobe or per-section pixel mapping.
• Operation Modes: auto, sound, master/slave, DMX, manual — flexible control for any gig.
• DMX Connectors + Panel: 3-pin XLR in/out + digital LED display with 4 buttons — standard daisy-chain wiring and fast on-device addressing.

Power, Build, and Rigging

• Power: 120 W, AC 100–240 V, 50/60 Hz — universal voltage for cross-border touring.
• Power Connectors: powercon in (blue) / out (white) — daisy-chain multiple bars from one outlet.
• Housing + IP: black aluminum, 100 x 7 x 13 cm, 2.9 kg net, IP20 — one-person rigging for indoor dry locations; ships with power cable, mounting bracket, 4 screws, and manual.