Som ny

Light4Me PIXEL BAR 48 RGBA LED-lysbjælke

Name: Light4Me PIXEL BAR 48 RGBA LED-lysbjælke (Som ny)
Brand: Light4Me
SKU: 844571
Price: 828.00 DKK
Availability: InStock

Mærke: Light4Me

Produktkode: 844571

Som ny

Mærke: Light4Me

Produktkode: 844571

828 kr

Som ny

Produkt, der aldrig har været udstillet eller brugt. Produktet er i 100% stand, men emballagen kan have mindre visuelle fejl som følge af håndtering under opbevaring eller transport. Velegnet til dem, der søger et produkt af høj kvalitet til en fordelagtig pris, uden kompromis på funktionalitet eller ydeevne. Produktet er dækket af fuld lovpligtig garanti.

På lager 1 stk.

Gratis levering over 2.590 kr

Spørg

110 point

Light4Me PIXEL BAR 48 RGBA LED-lysbjælke

828 kr

Se også disse nedsatte alternativer. Du kunne måske være interesseret i:

The Light4Me PIXEL BAR 48 RGBA is a 1-metre LED wash bar packing 48 × 3 W RGBA emitters split into 8 controllable sections, aimed at DJs, bands, and event companies. RGBA colour mixing (red, green, blue, amber) produces warmer tones than standard RGB bars, and the 35° beam angle keeps the wash focused where it is needed. 48 × 3 W RGBA LEDs —...

Beskrivelse
Parametre og specifikationer
Anbefalet tilbehør
Spørgsmål og svar
Dokumenter
Andre udpakkede varianter
Sammenlign lignende produkter

828 kr

Light4Me PIXEL BAR 48 RGBA LED-lysbjælke

Som ny

48 × 3 W RGBA LEDs — split into 8 sections of 6 LEDs for chase effects and pixel-style animations
Six DMX channel modes (4 / 6 / 9 / 32 / 36 / 76) — match the bar to any console, from compact controllers to full-size desks
54 auto programs + 2 sound-active modes — run a full light show without a controller, with adjustable mic sensitivity for beat-locked response
Aluminium housing, 2.8 kg net weight — light enough to truss or floor-mount, with passive cooling for silent operation in theatres and galleries

Yderligere beskrivelse på dit sprog er ikke tilgængelig endnu. Måske vil beskrivelsen på engelsk hjælpe dig i mellemtiden.

Light4Me PIXEL BAR 48 RGBA — Stage-Ready RGBA Wash Bar

The Light4Me PIXEL BAR 48 RGBA is a 1-metre LED wash bar for DJs, bands, and event companies. Forty-eight 3-watt RGBA emitters deliver warmer tones than standard RGB bars thanks to the dedicated amber channel. A 35° beam angle keeps output focused for stage washes, wall uplighting, or pixel-mapped chases. The black aluminium housing weighs 2.8 kg.

What Sets This Bar Apart in Its Class

Most entry-level LED bars rely on RGB mixing, but this unit adds an amber LED per cell, filling the gap between red and yellow that RGB cannot reproduce. The 8-section pixel layout enables chase patterns from the on-board menu. Passive cooling through the aluminium housing means zero fan noise.

RGBA Light Source — Warmer Tones, Wider Palette

The RGBA LED array gives lighting designers a broader colour gamut than RGB-only bars, including natural skin tones and warm whites. Each LED runs at 3 W, with 48 emitters grouped into 8 individually controllable sections.

LED Type: RGBA (4-in-1) — red, green, blue, amber per cell
LED Power: 3 W per LED, 48 LEDs total
Beam Angle: 35° — focused wash without spill

DMX, Auto, and Sound Modes — One Bar, Many Setups

Six DMX channel profiles match the bar to compact controllers or full-size consoles. For stand-alone use, 54 auto programs with adjustable speed and 2 sound-active programs cover most event scenarios. Master/slave linking chains several bars for synchronised shows.

DMX Channels: 4 / 6 / 9 / 32 / 36 / 76 — six profiles for any console
DMX Connectors: 3-pin XLR in/out — industry-standard cabling
Auto Programs: 54 + loop, adjustable speed

Aluminium Housing, Silent Cooling, Ready to Rig

The black aluminium enclosure keeps the bar at 2.8 kg net weight while doubling as a passive heatsink — no fans, no noise. IEC in/out power connectors allow daisy-chaining multiple units from a single outlet, and the IP20 rating confirms indoor-use suitability.