Vælg leveringsland

RockBoard RBO B LED STRIP 80 Lampe

Produktkode: 1338181

RockBoard RBO B LED STRIP 80 Lampe

Produktkode: 1338181

The RockBoard LED Strip 80 cm / 31,50" - Pedalboard Illumination is a self-adhesive RGB lighting strip designed specifically for effects pedalboards. It connects to any standard pedalboard power supply via a 2.1 x 5.5 mm barrel socket and runs on 5–12 V DC. The strip carries 45 RGB SMD LEDs, can be trimmed every 5 cm, and offers static or dynamic…

RockBoard RBO B LED STRIP 80 Lampe

The RockBoard LED Strip 80 cm / 31,50" - Pedalboard Illumination is a self-adhesive RGB lighting strip designed specifically for effects pedalboards. It connects to any standard pedalboard power supply via a 2.1 x 5.5 mm barrel socket and runs on 5–12 V DC. The strip carries 45 RGB SMD LEDs, can be trimmed every 5 cm, and offers static or dynamic colour modes with adjustable speed.

  • 80 cm length with 45 RGB SMD LEDs for even pedalboard illumination
  • Self-adhesive 3M backing for tool-free mounting under or along board edges
  • Powered by any standard 5–12 V pedalboard PSU via 2.1 x 5.5 mm barrel socket
  • Cuttable every 5 cm to fit custom pedalboard layouts
Yderligere beskrivelse på dit sprog er ikke tilgængelig endnu. Måske vil beskrivelsen på engelsk hjælpe dig i mellemtiden.

Pedalboard Illumination That Drops Into Any Rig

The RockBoard LED Strip 80 cm / 31,50" - Pedalboard Illumination is a purpose-built ambient lighting strip for effects pedalboards. It mounts on the underside or edges of a board, adding stage atmosphere and practical visibility for players reading footswitches in low light. Power is drawn from any standard pedalboard PSU through a 2.1 x 5.5 mm barrel socket, so no extra adapter is needed. This LED strip is the right choice for guitarists and bassists who want a clean, integrated lighting upgrade without adding another wall-wart to their rig.

Engineered Around the Pedalboard PSU

Unlike generic RGB strips, this model is built around the 2.1 x 5.5 mm DC barrel connector that already lives on most pedalboard power supplies. The 3M adhesive backing and included alcohol pad ensure a long-lasting bond, while cut points every 5 cm let the strip be trimmed to fit smaller boards without breaking the circuit.

Lighting Performance — RGB SMD Configuration

The strip uses RGB SMD LEDs that support static colours, dynamic colour-changing modes and adjustable speed.

  • LED Type: RGB SMD
  • Number of LEDs: 45 — evenly distributed across the 80 cm strip
  • Cuttable Segments: approx. every 5 cm (3 LEDs per segment)

Power Requirements — Drop-In Compatibility

Power delivery uses the same DC barrel ecosystem that powers the effects pedals themselves, so no separate power brick is needed.

  • Operating Voltage: 5–12 V DC, centre negative
  • Current Draw: approx. 210 mA at 9 V
  • Connection: 2.1 x 5.5 mm barrel socket

Physical Dimensions & Installation

The slim profile keeps the strip discreet when mounted under the board.

  • Length: 800 mm
  • Width: 10 mm
  • Height: 3 mm
  • Connection Cable Length: approx. 250 mm (incl. socket)
  • Mounting: self-adhesive 3M backing tape
  • Package Contents: alcohol cleaning pad, 2 self-adhesive cable-tie holders, 3 cable ties

Egnethed

Type

Lampe

Pakke

Pakkens indhold

Kabelbindere

Strømforsyning

Strømforsyning

Adapter (not included)

Tilbehør

UK/EU Strømforsyning er inkluderet

Nej

Dimensioner og vægt

Længde (cm)

80

Bredde (mm)

10

Højde (mm)

3

Land

Lavet i

Kina

Dokumenter

Brugsanvisninger
Producentinformation
Producent:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Tyskland
Ansvarlig person:
Warwick GmbH & Co Music Equipment KG
Sikkerhedsinstruktioner

Se brugervejledningen for de specifikke sikkerhedsinstruktioner for dette produkt.