KRK Kreate 3 Aktiv studiemonitor 2 Stk.
The KRK Kreate 3 Studio Monitor Pair packs the brand's reference monitoring heritage into a 3.5-inch two-way system optimized for small workspaces. Its woven glass fiber woofer and textile dome tweeter reveal subtle mix details, while Bluetooth and a selection of analog inputs ensure flexible connectivity. With independent HF/LF tuning and a 130 W Class D amplifier, the response stays true in any environment.
- Ships as a compact 3.5-inch active/passive satellite pair, making it easy to set up on a desk or shelf.
- The combination of a glass fiber woofer and neodymium-powered textile tweeter keeps highs fatigue-free, reaching 33 kHz.
- Bluetooth 5.3, TRS, RCA, and 3.5 mm inputs handle a variety of sources with ease.
- Room-optimizing trim switches and robust amplification achieve 104 dB SPL for clear, dynamic playback at any level.
KRK Kreate 3 Studio Monitor Pair — Compact Reference Monitoring for Tight Spaces
Designed to condense KRK's reference-monitor legacy into a space-saving, two-way format, this stereo pair (one active, one passive) reveals every nuance of your mix across a 70 Hz to 33 kHz range. Listeners can expect signature midrange and airy highs from a footprint that barely takes up desk space.
What Sets the Kreate 3 Apart in Its Class
The sound signature is shaped by a woven glass fiber woofer for controlled low end and a textile dome tweeter with neodymium drive for sparkling highs up to 33 kHz. Acoustic isolation is handled straight out of the box with a factory-installed foam pad, and True Wireless Stereo Bluetooth 5.3 enables cable-free streaming between speakers.
Driver Design and Amplification — Honest Sound at Any Volume
With its two-way bass reflex build, a 3.5-inch glass fiber woofer teams up with a 3/4-inch textile tweeter at a 3.06 kHz crossover point. The Class D amp provides 32.5 W per channel (130 W total), allowing transients to remain detailed throughout long sessions.
- Low-Frequency Driver: 3.5-inch woven glass fiber composite cone, ferrite magnet — delivers tight, accurate bass for mix reliability.
- High-frequency content is reproduced through a 3/4-inch textile dome tweeter, enhanced by a neodymium magnet, achieving fatigue-free highs up to 33 kHz.
- Amplifier Power: 130 W dynamic / 65 W continuous (Class D) — ensures your audio remains punchy and clean.
Frequency Response and SPL — Full-Range Translation in a Small Box
Frequency response is rated at 70 Hz to 33 kHz (±3 dB), with low-frequency extension down to 63 Hz at -10 dB. The system offers a max SPL of 104 dB per pair, so you have headroom for mixing and playback.
- Frequency Response: 70 Hz – 33 kHz (±3 dB) — covers a broad range for accurate mix translation.
- The monitors extend to 63 Hz (-10 dB), allowing for confident bass referencing below typical compact monitor limits.
- Max SPL: 104 dB per pair — sufficient headroom for tracking, mixing, and listening at higher volumes.
Connectivity and Room Tuning — Plug Into Any Source, Tune to Any Room
Three analog inputs support diverse setups, while Bluetooth 5.3 with A2DP enables wireless streaming from modern devices. You can fine-tune the voicing using independent HF and LF trim switches to suit different rooms and preferences.
- Analog Inputs: RCA, 6.3 mm balanced TRS, 3.5 mm TRS auxiliary — connects easily to interfaces, mixers, or consumer gear.
- Bluetooth 5.3 with TWS pairing makes it possible to stream between cabinets wirelessly, freeing up desk space.
- Room Tuning is managed by HF/LF trim switches and a built-in isolation pad, addressing acoustic challenges without extra equipment.
Who Should Choose the KRK Kreate 3
It is ideal for bedroom producers, podcasters, and content creators needing reliable nearfield monitoring in small studios or mobile setups. Thanks to its 205 x 140 x 159 mm size and 4.5 kg weight per cabinet, this model can travel for remote mix sessions. Streamers will also appreciate the convenience of built-in Bluetooth and a 3.5 mm auxiliary input for switching between projects and casual listening.
Type
LF-drivertype
HF-drivertype
EQ
Kontrolelementer
Volumen, Bluetooth, Standby, HF Level Adjust, LF Level Adjust
Bluetooth
Frekvensområde
Bashøjttaler
Tweeter
Effekt (Watt)
Strøm
Bas refleksport
Crossover-frekvens (kHz)
Crossover frekvens
Farve
Original farve af producent
Black
Hylster
Indgange
AUX IN
Hovedtelefon udgang
Linjeindgange
USB
Lydtryksniveau - SPL (dB)
forstærker konfiguration
Effekt RMS (Watt)
Effekt RMS
Lydtryksniveau (SPL)
Strømforsyning
240 V
Fjernbetjening
Nej
UK/EU Strømforsyning er inkluderet
Ja
Bredde (cm)
14
Dybde (cm)
15,9
Højde (cm)
20,5
Vægt
4,5 kg
Nettovægt (kg)
4,5
Lavet i
Kina
Dokumenter
Brugsanvisninger
Producentinformation
Sikkerhedsinstruktioner
Se brugervejledningen for de specifikke sikkerhedsinstruktioner for dette produkt.
