Kali Audio LP-6 V2 Aktiv studiemonitor 1 Stk.

Kali Audio LP-6 V2 — Honest Nearfield Monitoring With Reference Accuracy

The Kali Audio LP-6 V2 is a 6.5-inch powered studio monitor for producers and mixing engineers who need transparent playback at a home-studio price. Part of the Project Lone Pine 2nd Wave, it delivers 80 watts of bi-amped Class D power split between a 1-inch textile dome tweeter and a 6.5-inch optimized paper woofer, reaching from 39 Hz to 25 kHz. Whether placed on a desk, a stand, or against a wall, this monitor is built to translate mixes reliably to consumer playback systems.

3-D Imaging Waveguide and Low-Noise Port Tube

Two engineering choices set this monitor apart at its tier. The 3-D Imaging Waveguide shapes tweeter dispersion so direct and reflected sound arrive consistently, producing a three-dimensional stereo image that lets users place individual instruments in space. The low-noise port tube uses airflow simulations to ensure air exits at uniform velocity, eliminating the chuffing turbulence that masks low-end detail in many ported cabinets. A dual-layer, large-diameter voice coil keeps distortion a full 6 dB below the nearest competitor.

80 W Bi-Amped Class D Power With Real Headroom

Bi-amped Class D topology delivers 40 W to the tweeter and 40 W to the woofer, totaling 80 W of clean amplification. At continuous reference-level playback the speaker maintains at least 20 dB of headroom and reaches 115 dB maximum SPL. System THD stays below 3% from 80 Hz to 1.7 kHz and below 2% above 1.7 kHz at 90 dB SPL measured at 1 meter, so even loud passages stay clean.

• Total Power: 80 W — split 40 W HF / 40 W LF for controlled driver behavior
• Amplifier Class: Class D — efficient, cool-running bi-amp topology
• Max SPL: 115 dB — enough output for nearfield and small-room mixing

39 Hz to 25 kHz — Full-Range Transparency From a 6.5-Inch Cabinet

Reaching from 39 Hz to 25 kHz, the response covers nearly the entire audible spectrum from a single compact enclosure. The 6.5-inch optimized paper woofer uses a larger magnet and voice coil than competitors in its class for accurate low-end extension and tight transient response. The 1-inch textile dome tweeter crosses over at 1500 Hz, and the cabinet is front-ported so users can place the speaker closer to walls without choking the bass.

• Frequency Response: 39 Hz - 25 kHz — full-range coverage from a nearfield cabinet
• LF Driver: 6.5-inch optimized paper cone — large magnet and voice coil for accurate bass
• HF Driver: 1-inch textile dome — smooth top end without harshness
• Crossover: 1500 Hz — seamless handoff between woofer and tweeter

Boundary EQ, DIP Switches, and Three Inputs

Built into the LP-6 V2 is a Boundary EQ system tuned at The Village Studios in Los Angeles. Eight DIP switches on the rear panel select presets for eight common speaker placements and provide LF/HF trims for fine-tuning. Connectivity covers balanced XLR, balanced 6.3 mm TRS, and unbalanced RCA, so the monitor pairs with audio interfaces, monitor controllers, or consumer gear without adapters. The cabinet measures 35.9 cm tall, 22.2 cm wide, and 26 cm deep, weighing 7.05 kg.

• Inputs: XLR, 6.3 mm TRS, RCA — balanced and unbalanced options in one box
• Boundary EQ: 8 DIP-switch presets — corrects placement-induced response shifts
• Enclosure: Front-ported MDF cabinet — 35.9 × 22.2 × 26 cm, 7.05 kg

Home Studio Engineers, Bedroom Producers, and Project Studios

The Kali Audio LP-6 V2 is the right choice for bedroom producers, home-studio mixing engineers, podcasters, and content creators who need reference-grade accuracy without flagship pricing. The Boundary EQ makes it forgiving in untreated rooms, while the 115 dB max SPL and 20 dB of headroom handle rock, electronic, and orchestral material at realistic monitoring levels. The LP-6 V2 also suits immersive Atmos setups on a budget, since Kali positions the LP-Series as one of the most affordable paths into Dolby Atmos mixing. Pair it with a subwoofer such as the Kali WS-6.2 for full-range work on EDM or film-score projects.

Kali Audio and Project Lone Pine

Kali Audio designs its monitors in Burbank, California, surrounded by Hollywood studios and professional audio manufacturers. The original LP-6 launched in 2018 to acclaim for its low distortion and hyper-realistic imaging, and the 2nd Wave update brought a more robust DSP, a 12 dB reduction in self-noise, and a refined amplifier design based on user feedback. The LP-6 V2 is available in black, white, and a Sweetwater-exclusive tungsten grey, and is wall- and ceiling-mountable using custom hardware from Triad-Orbit.