Vælg leveringsland

Audio-Technica AT-VM95E/H Hi-Fi Patron

4,9/5

Produktkode: 855572

Audio-Technica AT-VM95E/H Hi-Fi Patron
4,9/5

Produktkode: 855572

Se også disse nedsatte alternativer. Du kunne måske være interesseret i:
Set includes AT-VM95E cartridge from VM95 series mounted on AT-HS6BK headshell. VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Audio-Technica AT-VM95E/H Hi-Fi Patron

Som ny
Produkt, der aldrig har været udstillet eller brugt. Produktet er i 100% stand, men emballagen kan have mindre visuelle fejl som følge af håndtering under opbevaring eller transport. Velegnet til dem, der søger et produkt af høj kvalitet til en fordelagtig pris, uden kompromis på funktionalitet eller ydeevne. Produktet er dækket af fuld lovpligtig garanti.

Set includes AT-VM95E cartridge from VM95 series mounted on AT-HS6BK headshell.

VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Yderligere beskrivelse på dit sprog er ikke tilgængelig endnu. Måske vil beskrivelsen på engelsk hjælpe dig i mellemtiden.
  • VM Stereo Dual Magnet
  • Mounting: 1/2” centres
  • Frequency Response: 20 - 22,000 Hz
  • Channel Separation: 20 dB (1 kHz)
  • Output Channel Balance: 2.0 dB (1 kHz)
  • Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
  • Vertical Tracking Angle: 23°
  • Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g)
  • Stylus Shape: Elliptical
  • Stylus Size: 0.3 x 0.7 mil
  • Stylus Construction: Bonded Round Shank
  • Cantilever: Aluminium Pipe
  • Coil Impedance: 3.3 kOhm (1 kHz)
  • Coil Inductance: 550 mH (1 kHz)
  • DC Resistance: 485 Ohm
  • Static Compliance: 17 x 10 – 6 cm / dyne
  • Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
  • Wire Used for Coil: T.P. Copper
  • Recommended Load Impedance: 47,000 Ohm
  • Recommended Load Capacitance: 100-200 pF
  • Replacement Stylus: AT-VMN95E
  • Dimensions: 21,2 x 21,4 x 62,4 mm
  • Weight: 15,5 g

Egnethed
Egenskaber

Form

Elliptical

Sporingskraft

1,8g - 2,2g

Sporingskraft er anbefalet

2 g

Sporingsvinkel

23°

Stylus spids radius

0,3 x 0,7 mil

Frekvensområde

20 Hz - 22 kHz

Overholdelse

7 x 10-6 cm (100 Hz)

Den anbefalede belastningsmodstand

47 kOhm

Anbefalet belastning kapacitans

100 - 200 pF

Akustik

Kanalbalance ved 1 kHz

2 dB

Kanaladskillelse ved 1 kHz

20 dB

Pakke

Pakkens indhold

Skruer, Washer (2 x)

Strømforsyning

Spænding

4 mV

Dimensioner og vægt

Vægt

6,1 g

Land

Lavet i

Japan

Baseret på antallet af anmeldelser: 31

Kundeanmeldelser af produktet

Alle anmeldelser kommer fra verificerede kunder, der tidligere har købt et produkt hos os.

Dokumenter

Producentinformation
Producent:
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, 194-8666, Tokyo, Japan
Ansvarlig person:
Audio-Technica Dutch Branch
Waardsedijk Oost 7, 3417 XJ, Montfoort, Holland
Sikkerhedsinstruktioner

Se brugervejledningen for de specifikke sikkerhedsinstruktioner for dette produkt.