cookies
Du vil finde vores "cookies" lækre
Cookies på Muzikers hjemmeside bruges til at gøre hvert af dine besøg hos os til en behagelig oplevelse. Accepter brugen af ​​alle cookies ved at klikke på knappen "Jeg accepterer", eller vælg kun dem du ønsker i indstillingerne. Mere information
Jeg accepterer
Afvis
Sælges ikke længere

Soundking Dante Adapter CXA036

Analog output version Dante adapter. This Dante adapter is designed with one RJ45 Dante input and two XLR analog outputs. This product enables simple connection of analog equipment to a Dante network, and can receive audio channels from a Dante...
Sælges ikke længere
Dette produkt produceres ikke eller er ikke inkluderet i det aktuelle tilbud.

Produktkode: CXA036 | ID: 312354

Soundking Dante Adapter CXA036

Analog output version Dante adapter. This Dante adapter is designed with one RJ45 Dante input and two XLR analog outputs. This product enables simple connection of analog equipment to a Dante network, and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analog audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor(DSP), or other analog audio equipment.

Analog output version: Dante signal turns into analog audio signal output, when connecting an amplifier, a speaker, etc.

As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure Dante analog output module to the Dante network. Device names, channel labels, signal routing and other parameters(for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

This Dante adapter use Power over Ethernet (PoE). Power can be provided from a PoE-capable network switch, or from a separate PoE injector.

Yderligere beskrivelse på dit sprog er ikke tilgængelig endnu. Måske vil beskrivelsen på engelsk hjælpe dig i mellemtiden.
  • Channel Number: 2
  • Max signal Level (balanced): +4 dBu@ 0 dBFS
  • Impedance: 150 Ohm (balanced) / 75 Ohm (unbalanced)
  • Sample Rate: 24 bit 44.1 kHz/48 kHz
  • Frequency Response: 20 Hz - 20 kHz ±0.5 dBu
  • THD+Noise: ≤ 0.07 % @+4dBu
  • Dynamic Range: 100 dB
  • Input Connector: 1 x RJ45
  • Output Connector: 2 x XLR male
  • Power Supply: Power over Ethernet
  • Power Consumption: <2 W
  • Colour: Black

Parametre og specifikationer