RCF AM 2080 Flerkanals effektforstærker

60 dB; (AUX) > 80 dB\nCrosstalk: (MIC) > 60 dB; (AUX) > 80 dB\nPhantom Power: 30 V dc \n\nInput Section\n Input sensitivity MIC: - 62 dBu\nInput sensitivity PHANTOM: - 29 dBu\nInput sensitivity LINE: - 29 \u00f7 + 11 dBu\nInput sensitivity AUX: - 18 \u00f7 + 20 dBu\nInput impedance MIC: 10 k\u03a9\nInput impedance PHANTOM: 10 k\u03a9\nInput impedance LINE: 10 k\u03a9\nInput impedance AUX: 20 k\u03a9\nBass Tone: (100 Hz) - 9 \u00f7 + 6 dB\nTreble Tone: (10 kHz) - 14 \u00f7 + 8 dB\nHigh-pass filter: 150 Hz\n\nOutput Section\nOutput Level: \u2013 1 dBu\nOutput impedance: 600 \u03a9\nPhantom power voltage/current: 30 / 0.018 V/A\nOutput Loudspeaker Low impedance: 4 \u03a9\nOutput Loudspeaker Constant voltage: 100 V ; 70 V\nAUX output: Pre ; Music on hold\nProtections: Overload, thermal, Short circuit, fuse \n\nPower Requirement\n Operating voltage: 220\u00f7240 / 110\u00f7120 ~ 50 / 60 V \u02dc Hz\nPower (consumption): 160 W\nFuse model: T1.6AL - 250 V ;T3.15AL - 250 V \n\nPhysical Specifications\n Height: 88 / 3.46 mm/inch\nWidth: 442 / 17.40 mm/inch\nDepth: 230 / 9.05 mm/inch\nNet weight: 3.8 / 8.37 kg/lbs"}" data-sheets-userformat="{"2":513,"3":{"1":0},"12":0}">AM 2080 is a mixer-amplifiers with 2 mic-line audio inputs on removable connectors (the first input also has an XLR socket) and 2 aux inputs for music sources (e.g. CD players, tuners, etc.). The nominal power: is a 80 W amplifier. The amplifier output is available either for low impedance loudspeakers or 100 – 70 V constant voltage line.FeaturesFull digital technology Mixer Amplifier 80 W RMS100 V - 70 V and 4 Ohm outputs2 universal inputs with phantom facility on screw terminal connectionsXLR connector on input 1RJ45 connectors on input 2 for connection to BM3001 microphoneConfigurable Priority settings, VOX facility on input 1Selectable aux inputs with two keys on the front panel for music sourceAux inputs with volume and tone controlsMusic On Hold and PRE outputsDigital Chime and Siren built-in generatorAmplifier Specifications Power output: 80 W rmsFrequency Response: 50 Hz ÷ 18 kHzDistortion: < 0.3%Signal/noise rate: (MIC) > 60 dB; (AUX) > 80 dBCrosstalk: (MIC) > 60 dB; (AUX) > 80 dBPhantom Power: 30 V dc Input Section Input sensitivity MIC: - 62 dBuInput sensitivity PHANTOM: - 29 dBuInput sensitivity LINE: - 29 ÷ + 11 dBuInput sensitivity AUX: - 18 ÷ + 20 dBuInput impedance MIC: 10 kInput impedance PHANTOM: 10 kInput impedance LINE: 10 kInput impedance AUX: 20 kBass Tone: (100 Hz) - 9 ÷ + 6 dBTreble Tone: (10 kHz) - 14 ÷ + 8 dBHigh-pass filter: 150 HzOutput SectionOutput Level: – 1 dBuOutput impedance: 600 Phantom power voltage/current: 30 / 0.018 V/AOutput Loudspeaker Low impedance: 4 Output Loudspeaker Constant voltage: 100 V ; 70 VAUX output: Pre ; Music on holdProtections: Overload, thermal, Short circuit, fuse Power Requirement Operating voltage: 220÷240 / 110÷120 ~ 50 / 60 V ~ HzPower (consumption): 160 WFuse model: T1.6AL - 250 V ;T3.15AL - 250 V Physical Specifications Height: 88 / 3.46 mm/inchWidth: 442 / 17.40 mm/inchDepth: 230 / 9.05 mm/inchNet weight: 3.8 / 8.37 kg/lbs.