Presonus R80 V2

The R80 V2 studio monitor provides realistic sound reproduction, allowing you to hear the room in your recordings. Its transparent sound and sensitive transient reproduction make it the ideal solution for anyone who mixes high definition sound. The exact same AMT technology that gives the R80 V2 natural-sounding, honest playback also ensures that potential problem areas in your mixes don't slip through your critical ear. Not only will your mixes sound their absolute best on R80 V2, but you’ll also be able to hear trouble spots in your tracks with surgical clarity. If you’re mixing or mastering high-resolution audio, the R80 V2 will ensure that you’ll hear every detail captured in your recordings.

Driven by a dedicated 65 watt Class A/B amp, the R80 V2’s custom-designed 6.8-square-inch Air Motion Transformer (AMT) excels at accurate reproduction of the highest of high frequencies—those responsible for a sense of air, space, and dimensionality. And the AMT’s astonishingly thin (< 0.01 mm) folded Kapton® membrane allows the tweeter to move in the same instant as the voltage cycles that power it, providing nothing less than wave cycle-accurate transient reproduction.

The unique AMT design also allows the R80 V2 to handle 8 to 13 times the projection area of more traditional tweeter designs, while the R80 V2’s unique housing constrains this projection area to the horizontal axis. The result is a very wide sweet spot with focused vertical dispersion, —minimizing reflections off of your desk, ceiling, and floor that could otherwise introduce problematic phase and coherence issues. And because it’s less subject to room-anomaly interference, the R80 V2 studio monitor reacts predictably and sounds consistent, even if moved to different listening environments.

R80 V2’s woofer is eight inches of rigid, custom-woven composite that offers consistent dispersion across its frequency range for the flattest response we could design. A dedicated 75 watt Class A/B amplifier provides ample headroom and impressive distortion-free, non-fatiguing performance—even at higher volumes.

Improving the respected R-series classics wasn’t easy, but we found a way: by giving you more control than was available on the original R80. The updated R80 V2 features analog acoustic tuning controls that will be familiar to users of our celebrated Eris® line—you get Low Cut, Mid Frequency, and High Frequency controls, as well as a three-way Acoustic Space switch that allow you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner. We also added a new Class A/B amplifier to provide an even warmer and smoother overall frequency response.

Of course, you also get classic PreSonus monitor connectivity, as R80 V2 provides balanced XLR, balanced ¼-inch TRS, and unbalanced RCA line-level inputs, so you can hook them up to an audio interface, mixer, monitor controller, or almost any other line-level source.

• Active studio monitor
• 2-way monitor with "Air Motion" tweeter
• 75/65 W Class D Amplifiers (LF / HF)
• 8 "woofer with Kevlar membrane
• Specially developed tweeter with very thin capon membrane (<0.01 mm)
• Transmission range: 40-22000 Hz
• Crossover frequency: 2.6 kHz
• The input sensitivity can be changed continuously using the gain potentiometer
• Sound pressure level: 107 dB
• Inputs: XLR, 1/4 "jack (balanced), RCA (unbalanced)
• Input impedance: 20 kOhm (balanced), 10 kOhm (unbalanced)
• Shielded against RF interference
• Delayed on / off
• Protection circuit against overheating and short circuit
• Economical auto-standby