Light4Me Six Eye Beam Belysningseffekt

Light4Me Six Eye Beam — Compact RGBW Beam Effect for Stages and Events

The Light4Me Six Eye Beam is a derby-style beam light effect aimed at DJs, bands, clubs, and mobile event rigs. Six lenses sit in front of 24 RGBW LEDs, throwing narrow, saturated beams across the dance floor. The Light4Me Six Eye Beam is the right choice for performers who need a plug-and-play beam fixture that runs on its own or takes direction from a DMX console.

What Sets This Fixture Apart

A six-lens optical array with four LEDs per lens produces tightly focused 8° beams that cut through haze. An infrared remote triggers built-in programs without touching the rear panel, while IEC power in/out and 3-pin DMX pass-throughs let you chain multiple units in one rig.

Light Source and Optical Output

RGBW colour mixing adds a dedicated white channel for cleaner pastel tones alongside saturated reds, greens, and blues.

• Light Source: 24 × 3 W RGBW LED — six lenses, four diodes each.
• Beam Angle: 8° — narrow projection that holds shape over distance.
• LED Power: 3 W per diode — bright output with low heat.

Control Modes and DMX Integration

Four operating modes cover everything from a single mobile fixture to a fully programmed show. The 4-channel DMX mode handles quick colour-and-program selection; the 26-channel mode unlocks per-lens control.

• DMX: Yes (DMX512) — 3-pin XLR in/out.
• DMX Channels: 4 / 26 — switchable basic and extended layouts.
• Operating Modes: Auto, Sound, Master/Slave, DMX — plus IR remote.
• Music-Controlled Programs: Yes — built-in microphone drives sound-active patterns.

Power, Dimensions, and Rigging

Universal mains voltage and a modest 2.8 kg net weight make transport and setup straightforward for touring DJs and small venues.

• Power Consumption: 80 W
• Supply Voltage: 100–240 V AC, 50/60 Hz
• Dimensions: 280 × 265 × 210 mm
• Net Weight: 2.8 kg
• Connectors: IEC power in/out, 3-pin DMX XLR in/out
• Protection Rating: IP20 — indoor use only.
• Package Contents: Power cable, mounting bracket, IR remote, user manual